Enfield

Where ever you live in the UK from the far north to your location and all the way to the south, energy suppliers are a constant cause of stress and financial drain. We all want to pay less for our energy but with costs and tariffs changing all the time, it can be very difficult to make the right decision. This page will point you in the right direction for help in Enfield and much more.

When people are looking for ways to reduce expenses or make better use of their money, they often look at common household expenses like utilities, subscriptions and even those associated with entertainment and recreation. The biggest monthly outgoing is usually food and energy bills.

In order to get the best gas and electricity deals available you need to understand how the gas and electricity suppliers are set up and how they calculate your bills. Many people don’t have a clue about the structure of the utility market in the UK and as a consequence end up spending way over the odds for their heating and lighting.

If you are looking for a better deal on your utilities then it’s pretty likely you were not too happy with your last bill. Especially in these tough economic times, you need to make sure you are not paying more than you have to. Just recently there have been further reports in the press of how the wholesale price of fuels is coming down yet the suppliers are not passing on these savings to their customers.

The easiest way to find the best gas and electricity for your area is to use a price comparison website, this takes all the guesswork, sales hype and confusion out of the process and lets your quickly see who can give you a better deal. I have consistently found energylinx to get the best prices and I would recommend you check them out. Utility bills often have a high monthly price, and reducing your spending on this can mean having more money that you can allocate toward other things.

You might also want to consider downsizing your lawn by using more hard surfaces to reduce electricity use with your lawnmower. Or perhaps you use a timer for your winter heating when leaving the heat on at a low level has been shown to reduce consumption. Cooking individual meals for families that could eat together is also an energy waste that can be recovered. Installing solar panels can produce energy for use in your home but the amount generated and the saving made depends on the position of your home and the time scale you need to recover the initial outlay. New smart meters claim to save you money by making you more aware of the energy you consume each day. However, these are not available everywhere in the country and there have been some issues with the technology.

After covering saving energy used for cooking and heating water in your home or office, we can make the transition to reducing the amount of electricity used for refrigeration, washing and lighting. Remember, up to 25% of total energy consumption in a home comes from these three areas. But don’t feel overwhelmed. Here are a few easy to implement strategies that can save on energy bills going forward.

Start With Heating.

The lowest cost method for reducing consumption is utilising programmable thermostats. Every degree that you adjust by equal a 4–5% reduction in energy usage for that system. Also, don’t forget to program thermostats to turn on and off at the proper times and you will begin to see a reduction in usage. Add strip curtains and automatic door closers to walks ins and Installing ECM’s on evaporator and condenser fans can reduce usage by approximately 2/3rds. On the lighting side, you have options as well. Start by adding occupancy sensors in select areas such as closets, storage rooms, staff bathrooms, etc. Also adding high-efficiency LED bulbs can reduce lighting consumption by up to 50%. Many utilities will cover a percentage (my local utility covers up to 70%) of the cost to purchase the bulbs, significantly improving ROI.

By implementing these simple strategies we have covered, you are well on your way to energy savings by reducing consumption which is a key element in any energy management plan.

electricity gas discount

How to generate Electricity

When the electronics are all unplugged and you're left considering whether you can unplug the refrigerator without your spouse noticing, it may be time to investigate another way to lower your electric bill. There's more you can do!

Besides potentially wreaking havoc on your family's refrigerated foods and feeling your wife's swift slap on the back of the head-- there are plenty of ways to obtain energy savings in London. Let's start with the home energy audit. When an energy expert conducts a home energy audit they're actually performing tests to identify those areas in your home that are costing you the most money. Many times, this energy expert will recommend different light bulbs or light fixtures.

According to ENERGY STAR you can lower your annual energy bill by £70 if you replace the five most frequently used light fixtures in your home and use ENERGY STAR qualified products.

Energy Saving Qualified Fixtures

Have you ever gotten frustrated by the insufficient performance of the supposed "energy efficient" product compared to the regular version? Unfortunately, that does happen, but it doesn't have to happen when you purchase LED lighting. Keep these traits in mind when you're buying your next LED light.

  • Brightness: Equal or better!
  • Light Output: Consistent color and brightness, no fading over time.
  • Efficiency: No fluttering; turns on instantly, no energy wasted when turned off.

What the U.S. Dept. of Energy Says About LED

One way the U.K. can save gobs of money and electricity over the next 20 years is by utilising LED lights instead of other lighting options. The UK Office of Energy claims a savings of £265 billion over the next 20 years and a reduction in lighting electricity by 33 percent by 2027. Also, the production of about 40 new power plants will be prevented!

Saving More On Energy Costs For Residents of Enfield

electricity v gas hot water

How Does the Wholesale Price of Gas Affect Household Energy Bills? Q and A

As global demand for electricity grows, are there alternatives to building more power stations which make smarter use of existing infrastructure? And in an industry renowned for high levels of consumer mistrust, could an Airbnb of energy finally deliver a consumer-centric energy market?

Technology is shaping our lives like never before, making our world smarter, more efficient and more connected. In the last decade, it has fuelled an explosion of sharing economy business models — adopted by the likes of Uber, Airbnb and Zipcar — who in just a few short years have revolutionised established industries. But can a sharing economy approach help to tackle one of man-kind’s greatest challenges and deliver clean, affordable and secure energy to all?

Sharing economies are a consumer-led phenomenon which work by exploiting excess capacity or inefficiencies in existing systems for mutual benefit. Take Airbnb for example. The wasted asset is your property and the excess capacity is the space you are not using. By creating a user-friendly platform and giving homeowners the security they need Airbnb have built the biggest hotel chain in the world, surpassing the Intercontinental Group in less than four years. They have achieved this because they haven’t needed to construct a single thing.

So how could this apply to the energy industry? As global demand for electricity grows, are there alternatives to building more power stations which make smarter use of existing infrastructure? And in an industry renowned for high levels of consumer mistrust, could an Airbnb of energy finally deliver a consumer-centric energy market?

Since the world’s first power station was built in 1882 the global energy system has worked on the basis that supply must follow demand. Consumers — businesses and households — have been passive users of power, paying to use what they want when they want, whilst electricity supply has adapted to ensure the lights stay on. This has created inefficient systems built for periods of peak demand — in the UK this is typically between 4–7pm on a cold winter evening — which most of the time are massively underused.

But this is no longer the case. Today, our ability to connect and control anything from anywhere means we can manage our demand for electricity in previously unimaginable ways, and consumers are emerging as a driving force for change.

By connecting everyday equipment to a smart platform (just as you might upload your property to Airbnb), it’s now possible for consumers to take advantage of small amounts of “flexible demand” in their existing assets and processes — be it a fridge, a water pump, or an office air con unit — and sell it to organisations tasked with keeping the lights on — like National Grid.

Applying artificial intelligence and machine learning to govern when and for how long assets may respond gives consumers confidence their equipment’s performance will not be affected, and in return for sharing their “flexible demand”, they benefit from cost savings or direct payments.

This sharing economy approach relies on the power of tech and our ability to orchestrate many thousands of consumer devices at scale. Any one piece of equipment can only make small changes to the timing of its electricity consumption — e.g. delaying when a fridge motor comes on for a few minutes during a spike in electricity demand at the end of a football match — but collectively, the impact is transformational.

It means that when electricity demand is greater than supply, we don’t need to fire up fossil-fuelled power stations. Instead, we can reduce demand by asking non-time critical assets to power down for a short while.

If the wind is blowing and too much electricity is being supplied, we don’t need to let this clean, abundant power go to waste, but can ask equipment to shift its demand and make use of this power as it is available.

And we don’t need to keep building more power stations to meet occasional peaks in demand. Instead, we can distribute demand more intelligently throughout the day, reducing the size of these peaks and making better use of existing capacity.

In the UK, Open Energi’s analysis suggests there is 6 gigawatts of peak demand which can be shifted for up to an hour without impacting end users. Put into context, this is equivalent to roughly 10% of peak winter demand and larger than the expected output of the planned Hinkley Point C — the UK’s first new nuclear power station in generations.

This doesn’t make it easy. Unlike other sharing economy success stories, energy is a public good. The need for incredibly robust solutions means the barriers to entry are high. But, if we can get it right, the prize is enormous; a cleaner, cheaper, more secure energy system which gives consumers control of how, when, and from where they consume their energy.

Businesses have already recognised the power they hold and the benefits it can bring, with the likes of Sainsbury’s, Tarmac, United Utilities and Aggregate Industries adopting the tech and demonstrating what’s possible. Households look set to follow, but wherever the flexibility comes from, it’s clear that consumers and the environment will benefit from a sharing economy approach to energy.

David Hill is strategy director of Open Energi. He is an expert on electricity markets and demand-side flexibility, including demand-side response and energy storage. He joined Open Energi in 2010 after completing an MSc Energy, Trade & Finance at Cass Business School.

If your local Utility company is one of the big six energy suppliers you probably aren’t getting the best deal possible. Most of the cheaper tariffs are offered by smaller, often unfamiliar companies. These are typically hidden or don’t feature prominently on the major energy comparison websites that compare the market.

Day 4 of Xmas — Electric Vehicles

For years global warming has been a major issue and to help stop global warming many people have been trying to cut down on their carbon admissions. In order to reduce your carbon footprint you must cut down on your energy consumption. The home is where most people consume the most energy because we need all types of energy to power our appliances. If you are looking for ways to save energy, then you should take a look at what areas of the home can you limit power consumption.

Heating in Your House

Many people have homes with a central heating system combined with a water boiler. Many of us are not maximizing this energy system's full potential and as a result we are wasting energy and money. The main thing we can do to utilize this system is better is install better insulation. If your house as inadequate insulation, then you are losing an enormous amount of heat so not only will your house take longer to warm up, but it will also cost you more money.

In The Home

The main cause of energy consumption in the home is the energy that appliances use. Even if an appliance is on standby it will be using energy and if you have multiple appliances, then the energy cost will add up. Keep an appliance plugged in is more convenient but is it really worth the energy consumption. It will save you a lot of energy and money if you just unplug your appliances and plug them in when you need them. The standby button is helpful but still not as good as turning off the appliance all together.

There are many things you can do to cut down on power consumption other than the ones listed here but these are a good place to start. Maybe some of these can be inconvenient but if you are saving the planet and money at the end of the month, then why not give it a try.

Would you like to be green, save energy and be more environmentally friendly, but you're not sure about what really works? If you would really like to find out which energy saving tips and ideas for going green work, then take a look at these top ten suggestions for saving energy that are guaranteed to work.

1. HOME LIGHTING

To get the most from your lighting:

a. Replace all incandescent light bulbs with energy efficient CFL's ( Compact Fluorescent Lights )

b. Reduce outdoor lighting loads by using solar powered path lighting and super bright solar lamps.

c. Install solar skylights to allow natural light into normally darkened areas of the home.

Using CFL's and more natural lighting methods is guaranteed to save energy.

2. DOORS AND WINDOWS

You can improve the efficiency of the doors and windows in your home or apartment whether you own or rent:

a. For drafts blowing under an exterior door: - on modern doors, adjust the threshold to reduce the gap between the bottom of the door and the threshold. - on older doors, install weather stripping that seals the crack at the bottom of the door when the door is shut.

b. Install weather stripping around the sides and top of all exterior doors.

c. To improve the efficiency of windows:

1. Install any available storm windows. - If storm windows are not available, but removable screens are installed, remove the screens and then wrap them with plastic and replace the screens.

2. Seal all cracks around window frames and siding with caulk.

3. Install heat shrinkable plastic on the inside of the window.

If you follow the guidelines provided for better sealing your doors and windows, you are guaranteed to save energy.

3. ELECTRIC CLOTHES DRYERS

The clothes dryer is a primary sources of wasted energy. Reduce dryer energy use by:

a. Install a dryer vent seal. The dryer vent seal stops back-drafts of outdoor air that could result in saving up to 10% of your home heating and cooling costs.

b. Don't run the dryer on frigid winter nights or on hot summer afternoons because whenever you run the dryer and exhaust the air outdoors, the same amount of air is being sucked into your home.

b. During the summer, set your fan reversing switch in the downwards position and use the low or medium speed setting to keep the room from becoming stagnant and prevent hot air from building up near the ceiling. In the meantime, the breeze from the fan will make you feel cooler as your perspiration evaporates from your exposed skin.

When we take advantage of using ceiling fans to better distribute our heated or cooled air, our overall comfort level increases while the amount of energy we use decreases. This more comfortable situation is guaranteed to save energy.

10. CLOTHING AND ATTIRE

By learning how to better dress ourselves, we could learn to live more comfortably in our homes while using less energy to condition the air within our homes.

a. During colder weather conditions, be sure to wear socks, full length pants and long sleeve shirts in your home. By protecting your exposed skin from drafts, you'll still feel comfortable at lower temperatures. Then, by lowering your thermostat by 5 to 10 degrees, you can save from 10% to 20% more energy.

b. During the summer, dress lighter and remove your socks if possible. Doing so will allow you to maintain a warmer temperature in the home and reduce your air conditioning costs.

Bottom line, if you are walking around your home in the winter in your shorts, you are going to be cooler and you will either raise the thermostat setting or put on more clothing. You either choose to waste energy or save energy.

We effectively give ourselves a raise in salary the moment we stop being wasteful. That's great motivation, so whether you agree with the reports on global warming or believe we should keep drilling or not, most of us already agree that we'd like to have more money, so by reducing what we waste, we will all have more money left to enjoy on things that matter to us.